Replaceable mop head

The replaceable nozzle is a very convenient and practical thing, as it is suitable for machine washing. And thanks to this factor, the duration of the use of such a thing continues at times. In addition, the replacement mop head is very easy to make. This process will not take much effort and time.

Materials:

# Basic sewing tools (sewing machine, thread, scissors, etc.)

# 2 pieces of terry cloth or microfiber (any towel will work too), at least 30 x 35 cm each.

# 2 big and colorful buttons or buttons

# Pattern paper

Work plan. On a piece of paper, you need to transfer the dimensions of the nozzle, indicate the length and width. Of course, you should proceed from the size of your mop. Based on the finished pattern, we will transfer to both pieces of fabric.

We prepare the sewing machine for work. First you need to connect two pieces of fabric with the right sides to each other. Start sewing from one long end of the nozzle, then sew all the edges of the product in a circle, just leave a 10 cm hole in order to turn it right side out.

Using scissors, carefully cut off the corners, while avoiding seams, otherwise holes will appear. The corner is cut off diagonally on the inside. When turning inside out, use a stick or ruler to reach and smooth out difficult corners.

The turned-out product should be stitched on the front side. Therefore, just make a stitch at a level of 0.5-1 cm from the edge.

The rag is almost ready for intensive use. However, there are not enough fasteners that should be placed on both sides of the product. We advise you to mark the fasteners 4 cm from the edge. We decide on which side the fasteners will be sewn, and on which side we have to make openings. Openings will definitely need to be processed.